About Exhaust O-2 Spacers
Q
-
Will this fit my vehicle?
A - Yes, if your vehicle is a 1996 or newer and has 2
inches of clearance to space the sensor out.
Q -
How hard is it to install?
A - Very easy to install. This is a 10 minute or less
installation.
Q -
How does this compare to an electronic O2 simulator?
A - This is a quick and easily reversible installation.
No cutting or soldering involved.
Q -
I have a 'Test Pipe' or High-Flow Cat and now have CEL
light, will this work?
A - Yes. This is what it is designed for.
Q -
Which sensor(s) does this go on?
A - Generally, this is intended for the rear O2 sensor(s).
Q -
I have new headers, will this work on the front O2
sensor(s)?
A - Yes. This is a 2 peice design. We recommend using
half a spacer on front sensor(s).
Q -
I want to remove my O2 sensor completely, will this work
for me?�
A - No, you must have a working O2 sensor in the exhaust
system.
Q -
I do not have an O2 bung in my new pipes, will this work
for me?�
A - No, you must have a working O2 sensor in the exhaust
system.
Q -
Will this fix a bad O2 sensor?
A - No, you must have a working O2 sensor.
* PLEASE NOTE: *
-
Strictly for use with a 49 state legal
aftermarket high-flow catalytic converter
such as a Magnaflow catalytic converter.
-
This product is not intended to and will not
provide emissions compliance.
-
Emissions laws vary by state. Check local
and federal laws before modifying your
exhaust system.
-
Emissions compliance is the sole
responsibility of the vehicle's owner.
-
These products are sold for
off-road use only. Any other use is the sole
responsibility of the vehicle’s owner.
This page has opened into a New Window